Sink CRD configurations

This document lists CRD configurations available for Pulsar sink connectors. The sink CRD configurations consist of sink connector configurations and the common CRD configurations.

Sink configurations

This table lists sink configurations.

Field	Description
name	The connector name is a string of up to 43 characters.
classname	The class name of a sink connector.
tenant	The tenant of a sink connector.
namespace	The Pulsar namespace of a sink connector.
clusterName	The Pulsar cluster of a sink connector.
replicas	The number of instances that you want to run for this sink connector. If no value is set, the system will set it to 1.
minReplicas	The minimum number of instances that you want to run for this sink connector. If no value is set, the system will set it to 1. When HPA auto-scaling is enabled, the HPA controller scales the Pods up / down based on the values of the minReplicas and maxReplicas options. The number of the Pods should be greater than the value of the minReplicas and be smaller than the value of the maxReplicas.
downloaderImage	The image for installing the init container that is used to download packages or functions from Pulsar if the download path is specified.
maxReplicas	The maximum number of instances that you want to run for this sink connector. When the value of the maxReplicas parameter is greater than the value of replicas, it indicates that the sink controller automatically scales the sink connector based on the CPU usage. By default, maxReplicas is set to 0, which indicates that auto-scaling is disabled.
sinkConfig	The sink connector configurations in YAML format.
timeout	The message timeout in milliseconds.
negativeAckRedeliveryDelayMs	The number of redelivered messages due to negative acknowledgement.
autoAck	Whether or not the framework acknowledges messages automatically. This field is required. You can set it to true or false.
maxMessageRetry	How many times to process a message before giving up.
processingGuarantee	The processing guarantees (delivery semantics) applied to the sink connector. Available values: atleast_once, atmost_once, effectively_once.
retainOrdering	The sink connector consumes and processes messages in order.
deadLetterTopic	The topic where all messages that were not processed successfully are sent.
subscriptionName	The subscription name of the sink connector if you want a specific subscription name for the input-topic consumer.
cleanupSubscription	Configure whether to clean up subscriptions.
subscriptionPosition	The subscription position.

Annotations

In Kubernetes, an annotation defines an unstructured Key Value Map (KVM) that can be set by external tools to store and retrieve metadata. annotations must be a map of string keys and string values. Annotation values must pass Kubernetes annotations validation. For details, see Kubernetes documentation on Annotations.

This example shows how to use an annotation to make an object unmanaged. Therefore, the Controller will skip reconciling unmanaged objects in reconciliation loop.

apiVersion: compute.functionmesh.io/v1alpha1
kind: Sink
metadata:
  annotations:
    compute.functionmesh.io/managed: "false"

Images

This section describes image options available for Pulsar sink CRDs.

Base runner

The base runner is an image base for other runners. The base runner is located at ./pulsar-functions-base-runner. The base runner image contains basic tool-chains like /pulsar/bin, /pulsar/conf and /pulsar/lib to ensure that the pulsar-admin CLI tool works properly to support Apache Pulsar Packages.

Runner images

Function Mesh uses runner images as images of Pulsar connectors. Each runner image only contains necessary tool-chains and libraries for specified runtime.

Pulsar connectors support using the Java runner images as their images. The Java runner is based on the base runner and contains the Java function instance to run Java functions or connectors. The streamnative/pulsar-functions-java-runner Java runner is stored at the Docker Hub and is automatically updated to align with Apache Pulsar release.

Image pull policies

When the Function Mesh Operator creates a container, it uses the imagePullPolicy option to determine whether the image should be pulled prior to starting the container. There are three possible values for the imagePullPolicy option:

Field	Description
Always	Always pull the image.
Never	Never pull the image.
IfNotPresent	Only pull the image if the image does not already exist locally.

Input

The input topics of a Pulsar Function. The following table lists options available for the Input.

Field	Description
topics	The configuration of the topic from which messages are fetched.
customSerdeSources	The map of input topics to SerDe class names (as a JSON string).
customSchemaSources	The map of input topics to Schema class names (as a JSON string).
sourceSpecs	The map of source specifications to consumer specifications. Consumer specifications include these options: - SchemaType: the built-in schema type or custom schema class name to be used for messages fetched by the connector. - SerdeClassName: the SerDe class to be used for messages fetched by the connector. - IsRegexPattern: configure whether the input topic adopts a Regex pattern. - SchemaProperties: the schema properties for messages fetched by the connector. - ConsumerProperties: the consumer properties for messages fetched by the connector. - ReceiverQueueSize: the size of the consumer receive queue. - cryptoConfig: cryptography configurations of the consumer.

Resources

When you specify a function or connector, you can optionally specify how much of each resource they need. The resources available to specify are CPU and memory (RAM).

If the node where a Pod is running has enough of a resource available, it is possible (and allowed) for a Pod to use more resources than its request for that resource. However, a Pod is not allowed to use more than its resource limit.

Secrets

Function Mesh provides the secretsMap field for Function, Source, and Sink in the CRD definition. You can refer to the created secrets under the same namespace and the controller can include those referred secrets. The secrets are provide by EnvironmentBasedSecretsProvider, which can be used by context.getSecret() in Pulsar functions and connectors.

The secretsMap field is defined as a Map struct with String keys and SecretReference values. The key indicates the environment value in the container, and the SecretReference is defined as below.

Field	Description
path	The name of the secret in the Pod's namespace to select from.
key	The key of the secret to select from. It must be a valid secret key.

Suppose that there is a Kubernetes Secret named credential-secret defined as below:

apiVersion: v1
data:
  username: foo
  password: bar
kind: Secret
metadata:
  name: credential-secret
type: Opaque

To use it in Pulsar Functions in a secure way, you can define the secretsMap in the Custom Resource:

secretsMap:
  username:
    path: credential-secret
    key: username
  password:
    path: credential-secret
    key: password

Then, in the Pulsar Functions and Connectors, you can call context.getSecret("username") to get the secret value (foo).

Authentication

Function Mesh provides the tlsConfig, tlsSecret, authSecret, authConfig fields for Function, Source, and Sink in the CRD definition. You can configure TLS encryption, TLS authentication, and OAuth2 authentication using the following configurations.

Note

The TLS configurations and TLS Secret configurations are exclusive. If you configure TLS configurations, TLS Secret configurations will not take effect.

• TLS configurations

  Field	Description
  allowInsecure	Allow insecure TLS connection.
  certSecretKey	The Secret key.
  certSecretName	The Secret name.
  enabled	Enable TLS configurations.
  hostnameVerification	Enable hostname verification.

• TLS Secret

  Field	Description
  tlsAllowInsecureConnection	Allow insecure TLS connection. By default, it is set to false.
  tlsHostnameVerificationEnable	Enable hostname verification. By default, it is set to true.
  tlsTrustCertsFilePath	The path of the TLS trust certificate file.

• Authentication Secret

  Field	Description
  clientAuthenticationPlugin	The client authentication plugin.
  clientAuthenticationParameters	The client authentication parameters.

• Authentication configurations

  Note

  Currently, only OAuth2 authentication configurations are supported. For other authentication methods, you can configure them using the Authentication Secret.

  Field	Description
  OAuth2 authentication
  audience	The OAuth2 "resource server" identifier for the Pulsar cluster.
  issuerUrl	The URL of the authentication provider that allows a Pulsar client to obtain an access token.
  scope	The scope of an access request. For more information, see access token scope.
  keySecretName	The name of the Kubernetes secret.
  keySecretKey	The key of the Kubernetes secret, which contains the content of the OAuth2 private key.

Packages

Function Mesh supports running Pulsar connectors in Java.

Field	Description
jarLocation	Path to the JAR file for the connector.
extraDependenciesDir	It specifies the dependent directory for the JAR package.

Cluster location

In Function Mesh, the Pulsar cluster is defined through a ConfigMap. Pods can consume ConfigMaps as environment variables in a volume. The Pulsar cluster ConfigMap defines the Pulsar cluster URLs.

Field	Description
webServiceURL	The Web service URL of the Pulsar cluster.
brokerServiceURL	The broker service URL of the Pulsar cluster.

Pod specifications

Function Mesh supports customizing the Pod running Pulsar connectors. This table lists sub-fields available for the pod field.

Field	Description
labels	Specify labels attached to a Pod.
nodeSelector	Specify a map of key-value pairs. For a Pod running on a node, the node must have each of the indicated key-value pairs as labels.
affinity	Specify the scheduling constraints of a Pod.
tolerations	Specify the tolerations of a Pod.
annotations	Specify the annotations attached to a Pod.
securityContext	Specify the security context for a Pod.
terminationGracePeriodSeconds	The amount of time that Kubernetes gives for a Pod before terminating it.
volumes	A list of volumes that can be mounted by containers belonging to a Pod.
imagePullSecrets	An optional list of references to secrets in the same namespace for pulling any of the images used by a Pod.
serviceAccountName	Specify the name of the service account that is used to run Pulsar Functions or connectors.
initContainers	The initialization containers belonging to a Pod. A typical use case could be using an initialization container to download a remote JAR to a local path.
sidecars	Sidecar containers run together with the main function container in a Pod.
builtinAutoscaler	Specify the built-in autoscaling rules. CPU-based autoscaling: auto-scale the number of Pods based on the CPU usage (80%, 50%, or 20%). Memory-based autoscaling: auto-scale the number of Pods based on the memory usage (80%, 50%, or 20%). If you configure the builtinAutoscaler field, you do not need to configure the autoScalingMetrics and autoScalingBehavior options and vice versa.
autoScalingMetrics	Specify how to scale based on customized metrics defined in connectors. For details, see MetricSpec v2 autoscaling.
autoScalingBehavior	Configure the scaling behavior of the target in both up and down directions (scaleUp and scaleDown fields respectively). If not specified, the default Kubernetes scaling behaviors are adopted. For details, see HorizontalPodAutoscalerBehavior v2 autoscaling.
env	Specify the environment variables to expose on the containers. It is a key/value map. You can either use the value option to specify a particular value for the environment variable or use the valueFrom option to specify the source for the environment variable's value, as shown below. ```yaml env: - name: example1 value: simpleValue - name: example2 valueFrom: secretKeyRef: name: secret-name key: akey ```